Medium Density Fiberboard (MDF)
One-Sentence Definition: JINDIWOOD Medium Density Fiberboard (MDF) is made from high-quality virgin poplar wood through fiber preparation, resin application, mat formation, and hot pressing. Its density is controlled between 650–850 kg/m³, with an exceptionally flat surface and a uniform, dense material, making it an ideal choice for decorative panel substrates, furniture manufacturing, interior decoration, and CNC routing and carving.
Core Positioning: 100% Virgin Poplar · E0/ENF Eco-Friendly · Flat Surface · CNC Routable and Carvable · Decorative Panel Substrate
Product Introduction
JINDIWOOD Medium Density Fiberboard (MDF) is made from high-quality virgin poplar wood through fiber preparation, resin application, mat formation, and hot pressing. The product complies with the GB/T 11718-2021 national standard, with density controlled between 650–850 kg/m³, an exceptionally flat surface, and a uniform, dense material, making it an ideal choice for decorative panel substrates, furniture manufacturing, interior decoration, and CNC routing and carving.
I. Core Advantages
1. Eco-Friendly and Healthy
E0 / ENF grades available, extremely low formaldehyde emission.
2. Flat Surface
Surface roughness Ra ≤3.2 μm, thickness tolerance ±0.15 mm, perfect finishing effect.
3. CNC Routable and Carvable
Uniform material, isotropic, suitable for CNC carving, routing, and grooving.
4. Good Screw-Holding Power
Internal bond strength ≥0.55 MPa, firm hardware connections.
5. Density Guarantee
Thin panels ≥830 kg/m³, thick panels ≥750 kg/m³, above the national standard.
6. Complete Specifications
Thickness 2–30 mm, standard size 1220×2440 mm, customization supported.
II. Main Applications
Melamine decorative panel substrate, wood veneer panel substrate, wardrobe doors, kitchen cabinet doors, office desk tops, door frames, decorative moldings, laminate flooring substrate, speaker cabinets, handicrafts, etc.
III. Customization and Services
OEM/ODM customization supported, minimum order quantity: 1 pallet
3 self-owned factories, annual output value exceeding USD 100 million, exporting to 20+ countries
Full after-sales guarantee: in case of quality issues, no discounts, 100% full compensation
Welcome to contact us for a quotation or sample
IV. Frequently Asked Questions (FAQ)
Q1: What is the difference between MDF and particleboard?
A: MDF is made from wood fibers; the fibers are fine and uniform, the surface flatness is excellent, and it is suitable for finishing and fine carving. Particleboard is made from wood chips, with a granular internal structure, good screw-holding power, and better cost-effectiveness. MDF is suitable for decorative panel substrates, door panel profiles, and carved parts; particleboard is suitable for cabinet bodies, shelves, and other structural parts.
Q2: What eco-friendly grades does MDF have? What is the formaldehyde emission?
A: JINDIWOOD MDF is available in E0 (≤0.025 mg/m³) and ENF (≤0.015 mg/m³) grades. It uses environmentally friendly adhesive, with extremely low formaldehyde emission, selectable according to the application scenario.
Q3: How is the moisture resistance of MDF? Can it be used in kitchens or bathrooms?
A: Standard MDF has average moisture resistance, with a 24-hour water absorption thickness swelling rate of ≤15%. For humid environments such as kitchens and bathrooms, moisture-resistant MDF is recommended (24-hour water absorption thickness swelling rate ≤10%), with strict edge sealing. Unsealed MDF edges swell severely upon water contact; use in long-term water-contact or outdoor environments is not recommended.
Q4: How is the routing and carving performance of MDF?
A: MDF is uniform, dense, and isotropic, offering the best routing and carving performance among all wood-based panels. It can be CNC-carved, routed, grooved, and shaped, suitable for door panel profiles, Roman columns, decorative moldings, handicrafts, etc. The machined surface is smooth and requires no secondary repair.
Q5: What thickness and size options are available for MDF?
A: JINDIWOOD MDF is available in thicknesses from 2 mm to 30 mm, with common thicknesses including 2.5, 3, 4, 5, 6, 8, 9, 12, 15, 18, 22, and 25 mm. The standard size is 1220×2440 mm, and custom sizes such as 1220×2810 mm, 1220×3035 mm, and 1220×3660 mm are also available. Thin panels ≥830 kg/m³, thick panels ≥750 kg/m³, above national standard requirements.
Q6: How is the screw-holding power of MDF?
A: MDF has an internal bond strength of ≥0.55 MPa, with good screw-holding power; surface screw-holding power reaches 700–1000 N. However, edge screw-holding power is relatively weak; it is recommended to install hardware on the panel face as much as possible. For edge installation, embedded nuts or additional connecting pieces are recommended for reinforcement.
Q7: What is the minimum order quantity (MOQ)? What is the delivery time?
A: The minimum order quantity is 1 pallet. Standard products: 15–30 days after order confirmation. Custom products: 20–40 days after sample confirmation.
Q8: What is your after-sales policy?
A: We provide a full after-sales guarantee. For confirmed quality issues, 100% full compensation and coverage of replacement shipping costs —— no discounts, no deductions.


